Training Events

    • December 31, 2024
    • 9:00 AM - 4:30 PM
    • TBA
    Register

    THIS EVENT LISTING IS FOR WAITLIST PURPOSES ONLY - REGISTER FOR THE WAITLIST AND YOU WILL BE NOTIFIED OF THE NEXT OFFERING.


    Soils are complex and can be difficult to assess on particular sites. Soils also dictate how large the system will be for a particular lot and how it will perform. Invariably the question that always comes up is “Is the soil on this site suitable for an on-site sewage system and how do I figure that out?” We have developed this course to help provide a starting point for you to learn more about soils, to demonstrate simple field techniques to determine what types of soils you are working with and to gain an appreciation on how to conduct a soil & site evaluation. By combining the expertise of an experienced professional with hands-on field work, we will provide a solid understanding of soils and how they impact the design, construction, and operation of on-site sewage systems.

    This course is intended for anyone who is interested in gaining more knowledge of soils and how they relate to on-site system inspection, design, and installation. Evaluating soils is a developed technique and this course will introduce participants to evaluation tools and advanced soil knowledge.

    This one-day course will enable you to:

    • Conduct a soils investigation for the design of on-site systems,
    • Evaluate a soil in the field based on its colour, texture, and other characteristics,
    • Properly take soil samples from a test pit or using a soil corer or auger,
    • Conduct percolation tests using different methods including test holes and permeameters,
    • Determine the elevation of the seasonally high groundwater table, and
    • Use field evaluation results to design an appropriate on-site system.

    Suggested Pre-Requisite: Five-Day Part 8 Licensing Course or equivalent experience

    Cancellation Policy:

    Refunds, less a $25.00 cancellation fee, will be issued upon written request to op-coordinator@oowa.org if received 24 hours prior to the event. Following that, no refunds will be issued. Ticket transfers will be honored in the following way: members may send alternate members at no additional cost. Members may send alternate non-members for an additional fee in accordance with ticket pricing. Non-members may send alternate members; however, a refund will not be issued for the difference in ticket price.

    • January 06, 2025
    • Online course via Blackboard Learn
    Register through George Brown College

    Contact Information for George Brown College:

    Read about our textbooks policy, and remember that the Continuing Education attendance policy and closure dates differ from those for full-time college programs.


    Our On-site Sewage Systems 2012 course is an overview/refresher course for experienced practitioners. This building code course largely deals with the requirements related to the on-site sewage systems regulated under the Ontario Building Code (systems with a design capacity of fewer than 10,000 litres per day). The requirements related to these systems are found in Part 8 of the Code. The curriculum covers permits, responsibilities, site conditions, the five classes of sewage systems, construction, occupational health and safety, evaluation of malfunctioning systems, change-of-use procedures and more.

    Note(s)

    COURSE ESSENTIALS:

    You must have a copy of the 2012 Building Code Compendium before you begin this course. The compendium is available for purchase through the George Brown College bookstore, at our Building Code and Trade Manuals website and at the Publications Ontario website.

    Prerequisites

    You must have a general understanding of the building construction process and basic blueprint reading skills.

    Additional Information

    Disclaimer: Ministry of Municipal Affairs and Housing (MMAH) exams are not included in this course. Visit the Ontario government’s building code web page for certification information.

    Hours and Fees

    Hours: 35

    Fee: $411.22, includes a non-refundable materials fee of $110

    CRN Delivery Method Note:

    Self-directed online classes use a learning management system (LMS) and offer teacher email support. A welcome letter with details about the LMS will be emailed to you.

    • January 13, 2025
    • Rideau Valley Conservation Authority, 3889 Rideau Valley Drive, Manotick, ON

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://orwcportal.rvca.ca/orwc/orwcregs1-sewage-system-installerinspector-license-jan-13-17-2025


    • January 20, 2025
    • 8:30 AM - 4:30 PM
    • Rideau Valley Conservation Authority; 3889 Rideau Valley Drive, Manotick, ON K4M 1A5

    MORE INFORMATION

    This course will introduce the design requirements for Ontario Building Code and BMEC approved sewage systems, case studies, with a focus on design examples.

    • February 03, 2025
    • Online course via Blackboard Learn
    Register through George Brown College

    Contact Information for George Brown College:

    Read about our textbooks policy, and remember that the Continuing Education attendance policy and closure dates differ from those for full-time college programs.


    Our On-site Sewage Systems 2012 course is an overview/refresher course for experienced practitioners. This building code course largely deals with the requirements related to the on-site sewage systems regulated under the Ontario Building Code (systems with a design capacity of fewer than 10,000 litres per day). The requirements related to these systems are found in Part 8 of the Code. The curriculum covers permits, responsibilities, site conditions, the five classes of sewage systems, construction, occupational health and safety, evaluation of malfunctioning systems, change-of-use procedures and more.

    Note(s)

    COURSE ESSENTIALS:

    You must have a copy of the 2012 Building Code Compendium before you begin this course. The compendium is available for purchase through the George Brown College bookstore, at our Building Code and Trade Manuals website and at the Publications Ontario website.

    Prerequisites

    You must have a general understanding of the building construction process and basic blueprint reading skills.

    Additional Information

    Disclaimer: Ministry of Municipal Affairs and Housing (MMAH) exams are not included in this course. Visit the Ontario government’s building code web page for certification information.

    Hours and Fees

    Hours: 35

    Fee: $411.22, includes a non-refundable materials fee of $110

    CRN Delivery Method Note:

    Self-directed online classes use a learning management system (LMS) and offer teacher email support. A welcome letter with details about the LMS will be emailed to you.

    • February 03, 2025
    • Virtual

    REGISTER  with the OBOA.

    If you have questions about this course, please contact the OBOA directly. 

    Prerequisites: None

    Course Description:
    NOTE: Manual is NOT included in course fee, you can use the online manual or purchase one from the OBOA website.

    Who is this course for?

    The Legal Process for Building Officials & Designers course is intended as an introduction to the legal process for all building officials, persons authorized by RCAs and individuals considering entering the world of Building Code administration in Ontario. The Legal Process for Building Officials course can also be an excellent training and preparation tool for designers preparing to write the Ministry of Municipal Affairs legal qualification examination.

    Beyond gaining a basic knowledge of the legal process related to building code administration, the course is designed to help prepare individuals to write the Ministry of Municipal Affairs legal qualification examination, the common element for all areas of MMA qualification.

    While all participants are encouraged to complete all 15 Chapters of the course, Chapters 1 through 12 are intended for all code practitioners and Chapters 13 through 15 provide information for Chief Building Officials, aspiring Chief Building Officials, Inspectors who have the same powers and duties as the Chief Building Official in relation to sewage systems or plumbing, Inspectors who are Supervisors and Managers of Inspectors and Registered Code Agencies.

    The Legal Process for Building Officials & Designers Course is a prerequisite course for the Building Officials and the Law.

    Course Objectives

    In addition to explaining the structure of the 2012 Ontario Building Code, how the Act is linked to the provisions of the Code and the identification of the Principal Authority, the course addresses the following topics:

    - Understanding Roles and the Legal Framework of the Act

    - Various Qualifications and Registration under the Act and the Code

    - Permit Applications and the Issuance Process for Permits

    - Exercising Lawful Entry

    - The Inspection and Compliance Processes

    - The Occupancy Process

    - Co-operation, Conflict and Dispute Resolution under the Act

    - Offences, Liability and Immunity from Actions

    - Change of Use and Renovations, and

    - Complying with Division B.

    Examination

    No examination is included with this course.

    NOTE: George Brown Students taking General Legal Process and Powers and Duties 2012 through OBOA will be required to write the exam for this course through George Brown College (GBC) for this course to qualify towards the OBOA/GBC - Building Officials Fundamentals Certificate.

    [Visit the Humber College's website http://humber.ca/buildingcodeexams/ to schedule the applicable Legal Examination, including payment of examination fees.]

    • February 03, 2025
    • Online

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://orwcportal.rvca.ca/ORWCONLINE


    • February 03, 2025
    • 9:00 AM
    • Kawartha Conservation 277 Kenrai Road Lindsay, ON K9V 4R1

    REGISTER   Please note that registration will close on January 20, 2025

    Program Overview

    This course deals with the 2012 Ontario Building Code (OBC) requirements for on-site Sewage Systems with design capacity of up to 10,000 litres per day. The OBC technical requirements for these systems are found primarily in Division B., Part 8 of the Code, but also include and refer to other portions of the OBC, the Building Code Act and Supplementary Standard SB6. This course is an introduction to the principles of on-site sewage systems and includes the following topics:

    • Requirements under the Building Code Act (BCA) as related to sewage systems
    • Site evaluations, test pits and percolation times (T-times)
    • System characteristics and daily design flows
    • Design and construction of Class 1, 2, 3, 4 and 5 sewage systems
    • Inspection and review of Class 1, 2, 3, 4 and 5 sewage systems
    • Operation and maintenance minimum requirements for existing systems, and
    • Occupational Health and Safety as related to sewage system inspection or enforcement

    This 5-day Exam Prep course is designed to prepare the student for writing the MMAH On-site Sewage Systems qualification exam. It is scheduled for February 3-7, 2025.

     

    Learning Objectives

    At the end of this course, participants will be able to understand:

    • Understand the legal requirements under the BCA and OBC
    • Evaluate the site characteristics and determine the options available for the site
    • Understand the minimum design requirements for the five classes of on-site sewage systems
    • Understand the construction requirements for the various types of systems
    • Understand some of the health and safety requirements related to the construction of on-site sewage systems
    • Understand the basics of evaluating malfunctioning systems, remedial work and change of use for buildings connected to existing systems

     

    Who Should Attend?

    This course is designed for on-site sewage system inspectors, designers, installers and supervisors of on-site sewage systems wishing to challenge Ministry of Municipal Affairs and Housing (MMAH) qualification examinations. On-site sewage system inspectors, must have successfully passed the required MMAH examinations and be registered to be employed in the permit approval or inspection of sewage systems. Designers, installers and supervisors must also have successfully passed the Ministry examination and registered be qualified to do design work for permit submissions or be an installer and/or supervisor for the construction of on-site sewage systems.

    Please visit http://www.humber.ca/buildingcodeexams/ for more information on the Ministry Building Code exams.

     

    Your Instructor

    Jeffrey Chalmers, CET, CBCO

    Jeffrey has over 40 years’ experience in building code interpretation and enforcement as a plans examiner, inspector, chief building official, building code consultant and instructor of building code courses. Jeff has extensive knowledge in all areas of the Ontario code and has helped develop new training courses in the Ontario Building Code and also the National Building Code, for training across Canada.

    Jeff is a member of OACETT, the OBOA and the OPIA.

     

    Pre-Requisites

    None

     

    Duration

    5 Days

     

    Venue Location

    Kawartha Conservation

    277 Kenrai Road

    Lindsay, ON

    K9V 4R1

     

    Deadline for Registration

    Please note that registration will close on January 20, 2025

     

    Cancellation Policy

    JM Consulting reserves the right to postpone a learning event no later than seven days before the course start date. If the course is cancelled, a full refund will be issued. JM Consulting is not responsible for travel arrangements and accommodation costs that have been incurred without a confirmation that the course is taking place.

    Please contact us at john@jmconsulting.agency to confirm that course is confirmed before making travel and accommodation arrangements.

    Anyone wishing to withdraw from an event must provide notification in writing to the above-mentioned email address. Refunds will be calculated as follows:

    • More that 10 business days prior to the course start date: a full refund minus a $50 administration fee
    • Between 1-9 days prior to the course start date: a 50% refund minus a $50 administration fee
    • Within 24 hours of the start date of the course: no refund will be provided

    “No Shows” are not subject to refunds.

     

    Registration Fees / Cost Breakdown 

    To register and make your credit card payment, please click on this link and register.: 

    Link will open soon.

    Registration costs include learning materials, exam prep questions and catering for the week.

    Contact

    Nancy Aspden 

    7053282271 ext. 218

    Email
    Website

    • February 10, 2025
    • Rideau Valley Conservation Authority, 3889 Rideau Valley Drive, Manotick, ON

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://orwcportal.rvca.ca/orwc/orwcregs2-sewage-system-installerinspector-license-feb-10-14-2025


    • February 24, 2025
    • Woodbridge - OBOA OFFICE Unit 7

    REGISTER  with the OBOA.

    If you have questions about this course, please contact the OBOA directly. 

    Prerequisites: None

    Course Description:
    NOTE: Manual is NOT included in course fee, you can use the online manual or purchase one from the OBOA website.

    Who is this course for?

    The Legal Process for Building Officials & Designers course is intended as an introduction to the legal process for all building officials, persons authorized by RCAs and individuals considering entering the world of Building Code administration in Ontario. The Legal Process for Building Officials course can also be an excellent training and preparation tool for designers preparing to write the Ministry of Municipal Affairs legal qualification examination.

    Beyond gaining a basic knowledge of the legal process related to building code administration, the course is designed to help prepare individuals to write the Ministry of Municipal Affairs legal qualification examination, the common element for all areas of MMA qualification.

    While all participants are encouraged to complete all 15 Chapters of the course, Chapters 1 through 12 are intended for all code practitioners and Chapters 13 through 15 provide information for Chief Building Officials, aspiring Chief Building Officials, Inspectors who have the same powers and duties as the Chief Building Official in relation to sewage systems or plumbing, Inspectors who are Supervisors and Managers of Inspectors and Registered Code Agencies.

    The Legal Process for Building Officials & Designers Course is a prerequisite course for the Building Officials and the Law.

    Course Objectives

    In addition to explaining the structure of the 2012 Ontario Building Code, how the Act is linked to the provisions of the Code and the identification of the Principal Authority, the course addresses the following topics:

    - Understanding Roles and the Legal Framework of the Act

    - Various Qualifications and Registration under the Act and the Code

    - Permit Applications and the Issuance Process for Permits

    - Exercising Lawful Entry

    - The Inspection and Compliance Processes

    - The Occupancy Process

    - Co-operation, Conflict and Dispute Resolution under the Act

    - Offences, Liability and Immunity from Actions

    - Change of Use and Renovations, and

    - Complying with Division B.

    Examination

    No examination is included with this course.

    NOTE: George Brown Students taking General Legal Process and Powers and Duties 2012 through OBOA will be required to write the exam for this course through George Brown College (GBC) for this course to qualify towards the OBOA/GBC - Building Officials Fundamentals Certificate.

    [Visit the Humber College's website http://humber.ca/buildingcodeexams/ to schedule the applicable Legal Examination, including payment of examination fees.]

    • February 24, 2025
    • Guelph

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://courses.opened.uoguelph.ca/search/publicCourseSearchDetails.do?method=load&courseId=18564&selectedProgramAreaId=16981&selectedProgramStreamId=


    • February 24, 2025
    • 9:00 AM
    • Parry Sound - Venue TBA

    REGISTER   Please note that registration will close on February 10, 2025.

    Program Overview

    This course deals with the 2012 Ontario Building Code (OBC) requirements for on-site Sewage Systems with design capacity of up to 10,000 litres per day. The OBC technical requirements for these systems are found primarily in Division B., Part 8 of the Code, but also include and refer to other portions of the OBC, the Building Code Act and Supplementary Standard SB6. This course is an introduction to the principles of on-site sewage systems and includes the following topics:

    • Requirements under the Building Code Act (BCA) as related to sewage systems
    • Site evaluations, test pits and percolation times (T-times)
    • System characteristics and daily design flows
    • Design and construction of Class 1, 2, 3, 4 and 5 sewage systems
    • Inspection and review of Class 1, 2, 3, 4 and 5 sewage systems
    • Operation and maintenance minimum requirements for existing systems, and
    • Occupational Health and Safety as related to sewage system inspection or enforcement

    This 5-day Exam Prep course is designed to prepare the student for writing the MMAH On-site Sewage Systems qualification exam. It is scheduled for February 24-28, 2025.

     

    Learning Objectives

    At the end of this course, participants will be able to understand:

    • Understand the legal requirements under the BCA and OBC
    • Evaluate the site characteristics and determine the options available for the site
    • Understand the minimum design requirements for the five classes of on-site sewage systems
    • Understand the construction requirements for the various types of systems
    • Understand some of the health and safety requirements related to the construction of on-site sewage systems
    • Understand the basics of evaluating malfunctioning systems, remedial work and change of use for buildings connected to existing systems

     

    Who Should Attend?

    This course is designed for on-site sewage system inspectors, designers, installers and supervisors of on-site sewage systems wishing to challenge Ministry of Municipal Affairs and Housing (MMAH) qualification examinations. On-site sewage system inspectors, must have successfully passed the required MMAH examinations and be registered to be employed in the permit approval or inspection of sewage systems. Designers, installers and supervisors must also have successfully passed the Ministry examination and registered be qualified to do design work for permit submissions or be an installer and/or supervisor for the construction of on-site sewage systems.

    Please visit http://www.humber.ca/buildingcodeexams/ for more information on the Ministry Building Code exams.

     

    Your Instructor

    Jeffrey Chalmers, CET, CBCO

    Jeffrey has over 40 years’ experience in building code interpretation and enforcement as a plans examiner, inspector, chief building official, building code consultant and instructor of building code courses. Jeff has extensive knowledge in all areas of the Ontario code and has helped develop new training courses in the Ontario Building Code and also the National Building Code, for training across Canada.

    Jeff is a member of OACETT, the OBOA and the OPIA.

     

    Pre-Requisites

    None

     

    Duration

    5 Days

     

    Venue Location

    TBA

     

    Deadline for Registration

    Please note that registration will close on February 10, 2025.

     

    Cancellation Policy

    JM Consulting reserves the right to postpone a learning event no later than seven days before the course start date. If the course is cancelled, a full refund will be issued. JM Consulting is not responsible for travel arrangements and accommodation costs that have been incurred without a confirmation that the course is taking place.

    Please contact us at john@jmconsulting.agency to confirm that course is confirmed before making travel and accommodation arrangements.

    Anyone wishing to withdraw from an event must provide notification in writing to the above-mentioned email address. Refunds will be calculated as follows:

    • More that 10 business days prior to the course start date: a full refund minus a $50 administration fee
    • Between 1-9 days prior to the course start date: a 50% refund minus a $50 administration fee
    • Within 24 hours of the start date of the course: no refund will be provided

    “No Shows” are not subject to refunds.

     

    Registration Fees / Cost Breakdown 

    Cost of learning event: $995.00

    HST: $129.35

    Total cost including HST: $1,124.35

    (Please contact us if receiving an invoice is the preferred method of payment)

    Registration costs include learning materials, exam prep questions and lunch for the week.

    • March 03, 2025
    • Online course via Blackboard Learn
    Register through George Brown College

    Contact Information for George Brown College:

    Read about our textbooks policy, and remember that the Continuing Education attendance policy and closure dates differ from those for full-time college programs.


    Our On-site Sewage Systems 2012 course is an overview/refresher course for experienced practitioners. This building code course largely deals with the requirements related to the on-site sewage systems regulated under the Ontario Building Code (systems with a design capacity of fewer than 10,000 litres per day). The requirements related to these systems are found in Part 8 of the Code. The curriculum covers permits, responsibilities, site conditions, the five classes of sewage systems, construction, occupational health and safety, evaluation of malfunctioning systems, change-of-use procedures and more.

    Note(s)

    COURSE ESSENTIALS:

    You must have a copy of the 2012 Building Code Compendium before you begin this course. The compendium is available for purchase through the George Brown College bookstore, at our Building Code and Trade Manuals website and at the Publications Ontario website.

    Prerequisites

    You must have a general understanding of the building construction process and basic blueprint reading skills.

    Additional Information

    Disclaimer: Ministry of Municipal Affairs and Housing (MMAH) exams are not included in this course. Visit the Ontario government’s building code web page for certification information.

    Hours and Fees

    Hours: 35

    Fee: $411.22, includes a non-refundable materials fee of $110

    CRN Delivery Method Note:

    Self-directed online classes use a learning management system (LMS) and offer teacher email support. A welcome letter with details about the LMS will be emailed to you.

    • March 03, 2025
    • Rideau Valley Conservation Authority, 3889 Rideau Valley Drive, Manotick, ON

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://orwcportal.rvca.ca/orwc/orwcregs3-sewage-system-installerinspector-license-mar-3-7-2025


    • March 03, 2025
    • 8:30 AM
    • Woodbridge - OBOA OFFICE Unit 7

    MORE INFORMATION AND REGISTRATION THROUGH OBOA WEBSITE

    Prerequisites: None

    Course Description:
    NOTE: Manual is NOT included in course fee, you can use the online manual or purchase one from the OBOA website.

    This OBOA 5 day (35 hr.) course deals with the fundamental requirements related to the administration and enforcement of the 2012 Ontario Building Code as related to private on-site Sewage Systems with design capacity less than 10,000 Litres per day. The regulatory requirements related to these systems are generally found under Div. B., Part 8 of the Code, but do also include and refer to substantial portions of Division C of the OBC, the Act as well as the Supplementary Standards SB5 and SB6. Designed as an introduction to the fundamental principles behind the topic, the course addresses the following topics and areas;
    - duties and responsibilities under the Act as related to Sewage systems
    - Site evaluations, Test Pits and T-Times,
    - Characteristics and distinguishing of Systems and Design Flows,
    - Design and Construction of Class 1, 2, 3, 4 and 5 Sewage Systems,
    - Inspection and Review of Class 1,2,3,4 and 5 Sewage systems,
    - Operation and Maintenance minimum requirements for existing systems, and
    - Occupational Health and Safety as related to sewage system inspection or enforcement.

    [Visit the Humber College's website http://humber.ca/buildingcodeexams/ to schedule the applicable Legal Examination, including payment of examination fees.]


    • March 10, 2025
    • 8:30 AM - 4:30 PM
    • Rideau Valley Conservation Authority; 3889 Rideau Valley Drive, Manotick, ON K4M 1A5

    MORE INFORMATION

    This full day course is an introductory level workshop that is intended to help participants develop skills to recognize when a pump is required, what type of information is needed to make an appropriate pump selection, and how to decide what types of controls will be required.  It will introduce participants to basic calculations for sizing the pump, the pump chamber and the float settings, including dosing calculations for both demand dosing and shallow buried trench systems. Participants will also be introduced to new technology including pressure transducers and level sensors.

    • March 10, 2025
    • 9:00 AM
    • Ingersoll - Venue TBA

    REGISTER   Please note that registration will close on February 24, 2025.

    Program Overview

    This course deals with the 2012 Ontario Building Code (OBC) requirements for on-site Sewage Systems with design capacity of up to 10,000 litres per day. The OBC technical requirements for these systems are found primarily in Division B., Part 8 of the Code, but also include and refer to other portions of the OBC, the Building Code Act and Supplementary Standard SB6. This course is an introduction to the principles of on-site sewage systems and includes the following topics:

    • Requirements under the Building Code Act (BCA) as related to sewage systems
    • Site evaluations, test pits and percolation times (T-times)
    • System characteristics and daily design flows
    • Design and construction of Class 1, 2, 3, 4 and 5 sewage systems
    • Inspection and review of Class 1, 2, 3, 4 and 5 sewage systems
    • Operation and maintenance minimum requirements for existing systems, and
    • Occupational Health and Safety as related to sewage system inspection or enforcement

    This 5-day Exam Prep course is designed to prepare the student for writing the MMAH On-site Sewage Systems qualification exam. It is scheduled for March 10-15, 2025.

     

    Learning Objectives

    At the end of this course, participants will be able to understand:

    • Understand the legal requirements under the BCA and OBC
    • Evaluate the site characteristics and determine the options available for the site
    • Understand the minimum design requirements for the five classes of on-site sewage systems
    • Understand the construction requirements for the various types of systems
    • Understand some of the health and safety requirements related to the construction of on-site sewage systems
    • Understand the basics of evaluating malfunctioning systems, remedial work and change of use for buildings connected to existing systems

     

    Who Should Attend?

    This course is designed for on-site sewage system inspectors, designers, installers and supervisors of on-site sewage systems wishing to challenge Ministry of Municipal Affairs and Housing (MMAH) qualification examinations. On-site sewage system inspectors, must have successfully passed the required MMAH examinations and be registered to be employed in the permit approval or inspection of sewage systems. Designers, installers and supervisors must also have successfully passed the Ministry examination and registered be qualified to do design work for permit submissions or be an installer and/or supervisor for the construction of on-site sewage systems.

    Please visit http://www.humber.ca/buildingcodeexams/ for more information on the Ministry Building Code exams.

     

    Your Instructor

    Jeffrey Chalmers, CET, CBCO

    Jeffrey has over 40 years’ experience in building code interpretation and enforcement as a plans examiner, inspector, chief building official, building code consultant and instructor of building code courses. Jeff has extensive knowledge in all areas of the Ontario code and has helped develop new training courses in the Ontario Building Code and also the National Building Code, for training across Canada.

    Jeff is a member of OACETT, the OBOA and the OPIA.

     

    Pre-Requisites

    None

     

    Duration

    5 Days

     

    Venue Location

    TBA

     

    Deadline for Registration

    Please note that registration will close on February 24, 2025.

     

    Cancellation Policy

    JM Consulting reserves the right to postpone a learning event no later than seven days before the course start date. If the course is cancelled, a full refund will be issued. JM Consulting is not responsible for travel arrangements and accommodation costs that have been incurred without a confirmation that the course is taking place.

    Please contact us at john@jmconsulting.agency to confirm that course is confirmed before making travel and accommodation arrangements.

    Anyone wishing to withdraw from an event must provide notification in writing to the above-mentioned email address. Refunds will be calculated as follows:

    • More that 10 business days prior to the course start date: a full refund minus a $50 administration fee
    • Between 1-9 days prior to the course start date: a 50% refund minus a $50 administration fee
    • Within 24 hours of the start date of the course: no refund will be provided

    “No Shows” are not subject to refunds.

     

    Registration Fees / Cost Breakdown 

    Cost of learning event: $995.00

    HST: $129.35

    Total cost including HST: $1,124.35

    (Please contact us if receiving an invoice is the preferred method of payment)

    Registration costs include learning materials, exam prep questions and lunch for the week.

    • March 17, 2025
    • 9:00 AM
    • Kawartha Conservation 277 Kenrai Road Lindsay, ON K9V 4R1

    REGISTER   Please note that registration will close on March 3, 2025.

    Program Overview

    This course deals with the 2012 Ontario Building Code (OBC) requirements for on-site Sewage Systems with design capacity of up to 10,000 litres per day. The OBC technical requirements for these systems are found primarily in Division B., Part 8 of the Code, but also include and refer to other portions of the OBC, the Building Code Act and Supplementary Standard SB6. This course is an introduction to the principles of on-site sewage systems and includes the following topics:

    • Requirements under the Building Code Act (BCA) as related to sewage systems
    • Site evaluations, test pits and percolation times (T-times)
    • System characteristics and daily design flows
    • Design and construction of Class 1, 2, 3, 4 and 5 sewage systems
    • Inspection and review of Class 1, 2, 3, 4 and 5 sewage systems
    • Operation and maintenance minimum requirements for existing systems, and
    • Occupational Health and Safety as related to sewage system inspection or enforcement

    This 5-day Exam Prep course is designed to prepare the student for writing the MMAH On-site Sewage Systems qualification exam. It is scheduled for March 17-21, 2025.

     

    Learning Objectives

    At the end of this course, participants will be able to understand:

    • Understand the legal requirements under the BCA and OBC
    • Evaluate the site characteristics and determine the options available for the site
    • Understand the minimum design requirements for the five classes of on-site sewage systems
    • Understand the construction requirements for the various types of systems
    • Understand some of the health and safety requirements related to the construction of on-site sewage systems
    • Understand the basics of evaluating malfunctioning systems, remedial work and change of use for buildings connected to existing systems

     

    Who Should Attend?

    This course is designed for on-site sewage system inspectors, designers, installers and supervisors of on-site sewage systems wishing to challenge Ministry of Municipal Affairs and Housing (MMAH) qualification examinations. On-site sewage system inspectors, must have successfully passed the required MMAH examinations and be registered to be employed in the permit approval or inspection of sewage systems. Designers, installers and supervisors must also have successfully passed the Ministry examination and registered be qualified to do design work for permit submissions or be an installer and/or supervisor for the construction of on-site sewage systems.

    Please visit http://www.humber.ca/buildingcodeexams/ for more information on the Ministry Building Code exams.

     

    Your Instructor

    Jeffrey Chalmers, CET, CBCO

    Jeffrey has over 40 years’ experience in building code interpretation and enforcement as a plans examiner, inspector, chief building official, building code consultant and instructor of building code courses. Jeff has extensive knowledge in all areas of the Ontario code and has helped develop new training courses in the Ontario Building Code and also the National Building Code, for training across Canada.

    Jeff is a member of OACETT, the OBOA and the OPIA.

     

    Pre-Requisites

    None

     

    Duration

    5 Days

     

    Venue Location

    Kawartha Conservation

    277 Kenrai Road

    Lindsay, ON

    K9V 4R1

     

    Deadline for Registration

    Please note that registration will close on March 03, 2025.

     

    Cancellation Policy

    JM Consulting reserves the right to postpone a learning event no later than seven days before the course start date. If the course is cancelled, a full refund will be issued. JM Consulting is not responsible for travel arrangements and accommodation costs that have been incurred without a confirmation that the course is taking place.

    Please contact us at john@jmconsulting.agency to confirm that course is confirmed before making travel and accommodation arrangements.

    Anyone wishing to withdraw from an event must provide notification in writing to the above-mentioned email address. Refunds will be calculated as follows:

    • More that 10 business days prior to the course start date: a full refund minus a $50 administration fee
    • Between 1-9 days prior to the course start date: a 50% refund minus a $50 administration fee
    • Within 24 hours of the start date of the course: no refund will be provided

    “No Shows” are not subject to refunds.

     

    Registration Fees / Cost Breakdown 

    To register and make your credit card payment, please click on this link and register.: 

    Link to open soon.

    Registration costs include learning materials, exam prep questions and catering for the week.

    Contact

    Nancy Aspden 

    7053282271 ext. 218

    Email
    Website

    • March 24, 2025
    • Online

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://orwcportal.rvca.ca/ORWCONLINE


    • March 31, 2025
    • 9:00 AM
    • Barrie - Venue TBA

    REGISTER   Please note that registration will close on March 17, 2025.

    Program Overview

    This course deals with the 2012 Ontario Building Code (OBC) requirements for on-site Sewage Systems with design capacity of up to 10,000 litres per day. The OBC technical requirements for these systems are found primarily in Division B., Part 8 of the Code, but also include and refer to other portions of the OBC, the Building Code Act and Supplementary Standard SB6. This course is an introduction to the principles of on-site sewage systems and includes the following topics:

    • Requirements under the Building Code Act (BCA) as related to sewage systems
    • Site evaluations, test pits and percolation times (T-times)
    • System characteristics and daily design flows
    • Design and construction of Class 1, 2, 3, 4 and 5 sewage systems
    • Inspection and review of Class 1, 2, 3, 4 and 5 sewage systems
    • Operation and maintenance minimum requirements for existing systems, and
    • Occupational Health and Safety as related to sewage system inspection or enforcement

    This 5-day Exam Prep course is designed to prepare the student for writing the MMAH On-site Sewage Systems qualification exam. It is scheduled for March 31-April 4, 2025.

     

    Learning Objectives

    At the end of this course, participants will be able to understand:

    • Understand the legal requirements under the BCA and OBC
    • Evaluate the site characteristics and determine the options available for the site
    • Understand the minimum design requirements for the five classes of on-site sewage systems
    • Understand the construction requirements for the various types of systems
    • Understand some of the health and safety requirements related to the construction of on-site sewage systems
    • Understand the basics of evaluating malfunctioning systems, remedial work and change of use for buildings connected to existing systems

     

    Who Should Attend?

    This course is designed for on-site sewage system inspectors, designers, installers and supervisors of on-site sewage systems wishing to challenge Ministry of Municipal Affairs and Housing (MMAH) qualification examinations. On-site sewage system inspectors, must have successfully passed the required MMAH examinations and be registered to be employed in the permit approval or inspection of sewage systems. Designers, installers and supervisors must also have successfully passed the Ministry examination and registered be qualified to do design work for permit submissions or be an installer and/or supervisor for the construction of on-site sewage systems.

    Please visit http://www.humber.ca/buildingcodeexams/ for more information on the Ministry Building Code exams.

     

    Your Instructor

    Jeffrey Chalmers, CET, CBCO

    Jeffrey has over 40 years’ experience in building code interpretation and enforcement as a plans examiner, inspector, chief building official, building code consultant and instructor of building code courses. Jeff has extensive knowledge in all areas of the Ontario code and has helped develop new training courses in the Ontario Building Code and also the National Building Code, for training across Canada.

    Jeff is a member of OACETT, the OBOA and the OPIA.

     

    Pre-Requisites

    None

     

    Duration

    5 Days

     

    Venue Location

    TBA

     

    Deadline for Registration

    Please note that registration will close on February 24, 2025.

     

    Cancellation Policy

    JM Consulting reserves the right to postpone a learning event no later than seven days before the course start date. If the course is cancelled, a full refund will be issued. JM Consulting is not responsible for travel arrangements and accommodation costs that have been incurred without a confirmation that the course is taking place.

    Please contact us at john@jmconsulting.agency to confirm that course is confirmed before making travel and accommodation arrangements.

    Anyone wishing to withdraw from an event must provide notification in writing to the above-mentioned email address. Refunds will be calculated as follows:

    • More that 10 business days prior to the course start date: a full refund minus a $50 administration fee
    • Between 1-9 days prior to the course start date: a 50% refund minus a $50 administration fee
    • Within 24 hours of the start date of the course: no refund will be provided

    “No Shows” are not subject to refunds.

     

    Registration Fees / Cost Breakdown 

    Cost of learning event: $995.00

    HST: $129.35

    Total cost including HST: $1,124.35

    (Please contact us if receiving an invoice is the preferred method of payment)

    Registration costs include learning materials, exam prep questions and lunch for the week.

    • April 07, 2025
    • Online course via Blackboard Learn
    Register through George Brown College

    Contact Information for George Brown College:

    Read about our textbooks policy, and remember that the Continuing Education attendance policy and closure dates differ from those for full-time college programs.


    Our On-site Sewage Systems 2012 course is an overview/refresher course for experienced practitioners. This building code course largely deals with the requirements related to the on-site sewage systems regulated under the Ontario Building Code (systems with a design capacity of fewer than 10,000 litres per day). The requirements related to these systems are found in Part 8 of the Code. The curriculum covers permits, responsibilities, site conditions, the five classes of sewage systems, construction, occupational health and safety, evaluation of malfunctioning systems, change-of-use procedures and more.

    Note(s)

    COURSE ESSENTIALS:

    You must have a copy of the 2012 Building Code Compendium before you begin this course. The compendium is available for purchase through the George Brown College bookstore, at our Building Code and Trade Manuals website and at the Publications Ontario website.

    Prerequisites

    You must have a general understanding of the building construction process and basic blueprint reading skills.

    Additional Information

    Disclaimer: Ministry of Municipal Affairs and Housing (MMAH) exams are not included in this course. Visit the Ontario government’s building code web page for certification information.

    Hours and Fees

    Hours: 35

    Fee: $411.22, includes a non-refundable materials fee of $110

    CRN Delivery Method Note:

    Self-directed online classes use a learning management system (LMS) and offer teacher email support. A welcome letter with details about the LMS will be emailed to you.

    • April 07, 2025
    • Rideau Valley Conservation Authority, 3889 Rideau Valley Drive, Manotick, ON

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://orwcportal.rvca.ca/orwc/orwcregs4--sewage-system-installerinspector-license-apr-7-11-2025


    • April 07, 2025
    • 9:00 AM
    • Kawartha Conservation 277 Kenrai Road Lindsay, ON K9V 4R1

    REGISTER   Please note that registration will close on March 24, 2025.

    Program Overview

    This course deals with the 2012 Ontario Building Code (OBC) requirements for on-site Sewage Systems with design capacity of up to 10,000 litres per day. The OBC technical requirements for these systems are found primarily in Division B., Part 8 of the Code, but also include and refer to other portions of the OBC, the Building Code Act and Supplementary Standard SB6. This course is an introduction to the principles of on-site sewage systems and includes the following topics:

    • Requirements under the Building Code Act (BCA) as related to sewage systems
    • Site evaluations, test pits and percolation times (T-times)
    • System characteristics and daily design flows
    • Design and construction of Class 1, 2, 3, 4 and 5 sewage systems
    • Inspection and review of Class 1, 2, 3, 4 and 5 sewage systems
    • Operation and maintenance minimum requirements for existing systems, and
    • Occupational Health and Safety as related to sewage system inspection or enforcement

    This 5-day Exam Prep course is designed to prepare the student for writing the MMAH On-site Sewage Systems qualification exam. It is scheduled for April 7-11, 2025.

     

    Learning Objectives

    At the end of this course, participants will be able to understand:

    • Understand the legal requirements under the BCA and OBC
    • Evaluate the site characteristics and determine the options available for the site
    • Understand the minimum design requirements for the five classes of on-site sewage systems
    • Understand the construction requirements for the various types of systems
    • Understand some of the health and safety requirements related to the construction of on-site sewage systems
    • Understand the basics of evaluating malfunctioning systems, remedial work and change of use for buildings connected to existing systems

     

    Who Should Attend?

    This course is designed for on-site sewage system inspectors, designers, installers and supervisors of on-site sewage systems wishing to challenge Ministry of Municipal Affairs and Housing (MMAH) qualification examinations. On-site sewage system inspectors, must have successfully passed the required MMAH examinations and be registered to be employed in the permit approval or inspection of sewage systems. Designers, installers and supervisors must also have successfully passed the Ministry examination and registered be qualified to do design work for permit submissions or be an installer and/or supervisor for the construction of on-site sewage systems.

    Please visit http://www.humber.ca/buildingcodeexams/ for more information on the Ministry Building Code exams.

     

    Your Instructor

    Jeffrey Chalmers, CET, CBCO

    Jeffrey has over 40 years’ experience in building code interpretation and enforcement as a plans examiner, inspector, chief building official, building code consultant and instructor of building code courses. Jeff has extensive knowledge in all areas of the Ontario code and has helped develop new training courses in the Ontario Building Code and also the National Building Code, for training across Canada.

    Jeff is a member of OACETT, the OBOA and the OPIA.

     

    Pre-Requisites

    None

     

    Duration

    5 Days

     

    Venue Location

    Kawartha Conservation

    277 Kenrai Road

    Lindsay, ON

    K9V 4R1

     

    Deadline for Registration

    Please note that registration will close on March 24, 2025.

     

    Cancellation Policy

    JM Consulting reserves the right to postpone a learning event no later than seven days before the course start date. If the course is cancelled, a full refund will be issued. JM Consulting is not responsible for travel arrangements and accommodation costs that have been incurred without a confirmation that the course is taking place.

    Please contact us at john@jmconsulting.agency to confirm that course is confirmed before making travel and accommodation arrangements.

    Anyone wishing to withdraw from an event must provide notification in writing to the above-mentioned email address. Refunds will be calculated as follows:

    • More that 10 business days prior to the course start date: a full refund minus a $50 administration fee
    • Between 1-9 days prior to the course start date: a 50% refund minus a $50 administration fee
    • Within 24 hours of the start date of the course: no refund will be provided

    “No Shows” are not subject to refunds.

     

    Registration Fees / Cost Breakdown 

    To register and make your credit card payment, please click on this link and register.: 

    Link to open soon.

    Registration costs include learning materials, exam prep questions and catering for the week.

    Contact

    Nancy Aspden 

    7053282271 ext. 218

    Email
    Website

    • April 14, 2025
    • 8:30 AM - 4:30 PM
    • Rideau Valley Conservation Authority; 3889 Rideau Valley Drive, Manotick, ON K4M 1A5
    • April 21, 2025
    • Guelph

    Course Description

    A 5 day training course designed primarily for installers and inspectors of on-site sewage systems in Ontario. This course covers Part 8 of the Ontario Building Code and is designed to prepare participants for the On-Site Sewage Systems (Part 8) technical licensing exam administered by the Ministry of Municipal Affairs & Housing (MMAH).  The course covers the entire training manual produced by MMAH.  In addition, supplementary material developed by the Ontario Rural Wastewater Centre, including additional material on approved alternative technologies, instructional videos, design problems and case studies is also provided. Finally daily access to hands-on demonstrations in our unique training facility is included. Please note the course does NOT include the licensing exam.

    OOWA Members receive a 10% discount. To receive the discount, you must use the current discount code which can be obtained by emailing info@OpenEd.uoguelph.ca.  Please ensure to provide your OOWA membership ID#.

    TO REGISTER VISIT:

    https://courses.opened.uoguelph.ca/search/publicCourseSearchDetails.do?method=load&courseId=18564&selectedProgramAreaId=16981&selectedProgramStreamId=


    • May 12, 2025
    • 8:30 AM - 4:30 PM
    • Mississippi Valley Conservation Authority; 10970 Highway 7, Carleton Place ON K7C 3P1
    • December 25, 2025
    • 9:00 AM - 4:00 PM
    • TBA
    Register

    THIS IS A WAITLIST ONLY - The actual date and location are TBA

    This full day course is an introductory level workshop that is intended to help participants develop skills to recognize when a pump is required, what type of information is needed to make an appropriate pump selection, and how to decide what types of controls will be required.  This session will focus and Part 8 requirements including basic calculations for sizing the pump, the pump chamber and the float settings, including dosing calculations for demand dosing.

Past events

December 09, 2024 Legal Process for Building Officials & Designers - 2012
December 02, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
December 02, 2024 On-site Sewage Systems 2012 - George Brown College
December 02, 2024 On-Site Sewage Systems 2012 – Septic Installer/Inspector Licensing Preparation Course
November 18, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
November 06, 2024 Pumps & Controls - Ottawa
November 04, 2024 Part 8 - On-Site Sewage Systems - 2012
November 04, 2024 On-site Sewage Systems 2012 - George Brown College
November 04, 2024 Legal Process for Building Officials & Designers - 2012
October 29, 2024 The 2024 Engineering Conference
October 28, 2024 Legal Process for Building Officials & Designers - 2012
October 23, 2024 Soils 101 – Evaluation of Soils for Onsite Sewage Treatment Systems
October 07, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
October 07, 2024 On-site Sewage Systems 2012 - George Brown College
September 30, 2024 Legal Process for Building Officials & Designers - 2012
September 09, 2024 On-site Sewage Systems 2012 - George Brown College
September 09, 2024 Legal Process for Building Officials & Designers - 2012
August 05, 2024 On-site Sewage Systems 2012 - George Brown College
July 08, 2024 On-site Sewage Systems 2012 - George Brown College
June 26, 2024 Emerging Professionals Virtual Q&A Panel Discussion
June 03, 2024 On-site Sewage Systems 2012 - George Brown College
May 27, 2024 Soils 101 – Evaluation of Soils for Onsite Sewage Treatment Systems
May 06, 2024 On-site Sewage Systems 2012 - George Brown College
April 29, 2024 Wastewater Basics: Terminology, Process and Sampling Techniques and Biological Health & Safety Awareness
April 22, 2024 On-Site Sewage Systems 2012 – Septic Installer/Inspector Licensing Preparation Course
April 17, 2024 OOWA Part 8 Panel Discussion Series - Code Changes
April 15, 2024 Introduction to Design of On-Site Sewage Treatment Systems
April 08, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
April 01, 2024 On-site Sewage Systems 2012 - George Brown College
March 18, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
March 11, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
March 04, 2024 On-site Sewage Systems 2012 - George Brown College
March 04, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
February 26, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
February 05, 2024 On-site Sewage Systems 2012 - George Brown College
January 29, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 29, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 15, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 08, 2024 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 08, 2024 On-site Sewage Systems 2012 - George Brown College
December 31, 2023 WAITLIST ONLY: Advanced Design of Onsite Sewage Treatment Systems
December 31, 2023 WAITLIST ONLY: Introduction to Design of Onsite Sewage Treatment Systems
December 04, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
December 04, 2023 Onsite Sewage Systems (Part 8) - 2012 Exam Prep
November 21, 2023 OOWA's 2023 Central Ontario Regional Meeting
November 16, 2023 Soils 101 – Evaluation of Soils for On-Site Sewage Treatment Systems
November 15, 2023 OOWA's 2023 Eastern Ontario Regional Meeting
November 13, 2023 Onsite Sewage Systems (Part 8) - 2012 Exam Prep
November 13, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
November 06, 2023 On-site Sewage Systems 2012 - George Brown College
November 02, 2023 OOWA's 2023 Greater Golden Horseshoe Regional Meeting
November 01, 2023 OOWA's 2023 Southwestern Ontario Regional Meeting
October 26, 2023 OOWA's 2023 Peterborough & the Kawarthas Regional Meeting
October 23, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
October 18, 2023 OOWA's 2023 Near North & Muskoka Regional Meeting
October 09, 2023 On-site Sewage Systems 2012 - George Brown College
September 24, 2023 OBOA AMTS (Ontario Building Officials Association Annual Meeting & Training Sessions)
September 20, 2023 Project Management for the Practitioner (7 PDU's)
September 18, 2023 Legal Process for Building Officials & Designers - 2012
September 11, 2023 Legal Process for Building Officials & Designers - 2012
September 11, 2023 On-site Sewage Systems 2012 - George Brown College
August 14, 2023 On-site Sewage Systems 2012 - George Brown College
July 10, 2023 On-site Sewage Systems 2012 - George Brown College
June 14, 2023 OOWA Part 8 Panel Discussion Series
June 05, 2023 On-site Sewage Systems 2012 - George Brown College
May 29, 2023 Legal Process for Building Officials & Designers - 2012
May 01, 2023 On-site Sewage Systems 2012 - George Brown College
April 24, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
April 24, 2023 Legal Process for Building Officials and Designers (Exam Prep)
April 17, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
April 03, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
April 03, 2023 On-site Sewage Systems 2012 - George Brown College
March 20, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
March 20, 2023 Legal Process for Building Officials & Designers - 2012
March 13, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
March 06, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
March 06, 2023 On-site Sewage Systems 2012 - George Brown College
February 27, 2023 Part 8 - On-Site Sewage Systems - 2012
February 27, 2023 Legal Process for Building Officials & Designers - 2012
February 13, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
February 13, 2023 Legal Process for Building Officials & Designers - 2012
February 06, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
February 06, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
February 06, 2023 On-site Sewage Systems 2012 - George Brown College
February 02, 2023 Advanced Design of Onsite Sewage Treatment Systems
January 30, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 23, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 16, 2023 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 09, 2023 Legal Process for Building Officials & Designers - 2012
January 09, 2023 On-site Sewage Systems 2012 - George Brown College
December 12, 2022 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
December 05, 2022 On-site Sewage Systems 2012 - George Brown College
November 07, 2022 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
November 07, 2022 On-site Sewage Systems 2012 - George Brown College
November 07, 2022 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
November 02, 2022 OOWA Part 8 Panel Discussion Series
October 31, 2022 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
October 20, 2022 OTTAWA: Introduction to Design of Onsite Sewage Treatment Systems
October 19, 2022 OOWA's 2022 Eastern Ontario Regional Meeting
October 13, 2022 OOWA's 2022 Central Ontario Regional Meeting
October 05, 2022 OOWA's 2022 Southern Ontario Regional Meeting
September 27, 2022 OOWA's 2022 Near North & Muskoka Regional Meeting
September 21, 2022 Webinar: Septic System Basics for Rural & Waterfront Property Owners
September 15, 2022 OOWA's 2022 Peterborough Regional Meeting
August 08, 2022 On-site Sewage Systems 2012 - George Brown College
June 15, 2022 Introduction to Design of Onsite Sewage Treatment Systems
May 18, 2022 OOWA Part 8 Panel Discussion Series
May 16, 2022 OBC PART 8 SEWAGE SYSTEM INSTALLERS COURSE OFFERED ONLINE
March 07, 2022 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
November 18, 2021 MECP Online Permissions Portal Demonstration
September 22, 2021 OOWA Part 8 Panel Discussion Series
August 02, 2021 General Legal Process and Powers and Duties 2012
August 02, 2021 On-site Sewage Systems 2012 - George Brown College
July 05, 2021 On-site Sewage Systems 2012 - George Brown College
July 05, 2021 General Legal Process and Powers and Duties 2012
June 16, 2021 OOWA Part 8 Panel Discussion Series
June 07, 2021 General Legal Process and Powers and Duties 2012
June 07, 2021 On-site Sewage Systems 2012 - George Brown College
May 18, 2021 On-Site Sewage System Training, Examinations & Qualification Registration Process Webinar
May 03, 2021 General Legal Process and Powers and Duties 2012
May 03, 2021 On-site Sewage Systems 2012 - George Brown College
April 13, 2021 On-Site Sewage System Training, Examinations & Qualification Registration Process Webinar
April 05, 2021 On-site Sewage Systems 2012 - George Brown College
April 05, 2021 General Legal Process and Powers and Duties 2012
March 10, 2021 On-Site Sewage System Training, Examinations & Qualification Registration Process Webinar
March 01, 2021 OBOA Virtual - Part 8 - On-Site Sewage Systems - 2012
February 22, 2021 OBOA Virtual - Part 8 - On-Site Sewage Systems - 2012
February 17, 2021 On-Site Sewage System Training, Examinations & Qualification Registration Process Webinar
February 10, 2021 Wastewater 102: Introduction to Ten States Standards
January 20, 2021 On-Site Sewage System Training, Examinations & Qualification Registration Process Webinar
January 20, 2021 Low Pressure Pipe Systems: A Workhorse for Effective and Sustainable Decentralized Wastewater Treatment on Difficult Sites
January 18, 2021 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
January 13, 2021 Why choose AES-Combined Treatment & Dispersal (CTD) Technology on your next Residential or Commercial Design?
November 23, 2020 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
November 02, 2020 Ontario Building Code (OBC) – Part 8 On-Site Sewage Systems Exam Prep
September 23, 2020 Presentation Skills for Technical Topics: A Hands-On Workshop
September 17, 2020 On-Site Sewage Systems Training, Examinations and Qualification Registration Process
September 17, 2020 Soils Evaluation
May 20, 2020 On-Site Sewage Systems Training, Examinations and Qualification Registration Process
Powered by Wild Apricot Membership Software